文档

Java™ 教程-Java Tutorials 中文版
JAXB 示例
Trail: Java Architecture for XML Binding (JAXB)
Lesson: Introduction to JAXB

JAXB 示例

The following sections describe how to use the sample applications that are included in the JAXB RI bundle. The JAXB RI bundle is available from http://jaxb.java.net. Download and install the JAXB RI bundle. The examples are located in the jaxb-ri-install/samples/ directory. These examples demonstrate and build upon key JAXB features and concepts. Follow these procedures in the order presented.

After reading this section, you should feel comfortable enough with JAXB that you can:

This document describes three sets of examples:


注意: The basic and customize examples are based on a Purchase Order scenario. Each uses an XML document, po.xml, written against an XML schema, po.xsd. These documents are derived from the W3C XML Schema Part 0: Primer, edited by David C. Fallside.

The basic and customize example directories contain several base files:

The following tables briefly describe the basic, customize, and java-to-schema JAXB examples.

Table: Basic JAXB Examples

Example Name 描述
Modify Marshal Demonstrates how to modify a Java content tree.
Unmarshal Validate Demonstrates how to enable validation during unmarshalling.

Table:  Customize JAXB Examples

Example Name 描述
Customize Inline Demonstrates how to customize the default JAXB bindings by using inline annotations in an XML schema.
Datatype Converter Illustrates alternate, more terse bindings of XML simpleType definitions to Java data types, and is similar to Customize Inline example.
External Customize Illustrates how to use an external binding declarations file to pass binding customizations for a read-only schema to the JAXB binding compiler.


Table:  Java-to-Schema JAXB Examples

Example Name 描述
Create Marshal Demonstrates how to use the ObjectFactory class to create a Java content tree and marshal it to XML data. It also demonstrates how to add content to a JAXB List property.
XmlAccessorOrder Illustrates how to use the @XmlAccessorOrder and @XmlType.propOrder mapping annotations in Java classes to control the order in which XML content is marshalled or unmarshalled by a Java type.
XmlAdapter Illustrates how to use the interface XmlAdapter and the annotation @XmlJavaTypeAdapter to provide a a custom mapping of XML content into and out of a HashMap (field) that uses an interger (int) as the key and a string (String) as the value.
XmlAttribute Illustrates how to use the annotation @XmlAttribute to define a property or field to be handled as an XML attribute.
XmlRootElement Illustrates how to use the annotation @XmlRootElement to define an XML element name for the XML schema type of the corresponding class.
XmlSchemaType Class Illustrates how to use the annotation @XmlSchemaType to customize the mapping of a property or field to an XML built-in type.
XmlType Illustrates how to use the annotation @XmlType to map a class or enum type to an XML schema type.

JAXB Compiler Options

The JAXB XJC schema binding compiler transforms, or binds, a source XML schema to a set of JAXB content classes in the Java programming language. The compiler class, xjc, is provided as: xjc.sh on Solaris/Linux and xjc.bat on Windows in the JAXB RI bundle. The xjc class is included in the JDK class library (in tools.jar).

Both xjc.sh and xjc.bat take the same command-line options. You can display quick usage instructions by invoking the scripts without any options, or with the -help switch. The syntax is as follows:

xjc [-options ...] <schema file/URL/dir/jar>... [-b >bindinfo<] ...

If dir is specified, all schema files in the directory will be compiled. If jar is specified, /META-INF/sun-jaxb.episode binding file will be compiled.

The xjc command-line options are as follows:

-nv
Do not perform strict validation of the input schema or schemas. By default, xjc performs strict validation of the source schema before processing. Note that this does not mean the binding compiler will not perform any validation; it will just perform a less-strict validation.
-extension
By default, the XJC binding compiler strictly enforces the rules outlined in the Compatibility chapter of the JAXB Specification. In the default (strict) mode, you are also limited to using only the binding customizations defined in the specification. By using the -extension switch, you are allowed to use the JAXB Vendor Extensions.
-b file
Specify one or more external binding files to process. (Each binding file must have its own -b switch.) The syntax of the external binding files is flexible. You may have a single binding file that contains customizations for multiple schemas or you can break the customizations into multiple bindings files. In addition, the ordering of the schema files and binding files on the command-line does not matter.
-d dir
By default, the XJC binding compiler generates Java content classes in the current directory. Use this option to specify an alternate output directory. The directory must already exist; the XJC binding compiler does not create one for you.
-p package
Specify an alternate output directory. By default, the XJC binding compiler will generate the Java content classes in the current directory. The output directory must already exist; the XJC binding compiler does not create one for you.
-httpproxy proxy
Specify the HTTP/HTTPS proxy. The format is [user[:password]@]proxyHost[:proxyPort]. The old -host and -port options are still supported by the Reference Implementation for backward compatibility, but they have been deprecated.
-httpproxyfile f
Works like the -httpproxy option but takes the argument in a file to protect password.
-classpath arg
Specify where to find client application class files used by the <jxb:javaType> and <xjc:superClass> customizations.
-catalog file
Specify catalog files to resolve external entity references. Supports TR9401, XCatalog, and OASIS XML Catalog format. For more information, see the XML Entity and URI Resolvers document or examine the catalog-resolver sample application.
-readOnly
Force the XJC binding compiler to mark the generated Java sources as read-only. By default, the XJC binding compiler does not write-protect the Java source files it generates.
-npa
Suppress the generation of package level annotations into **/package-info.java. Using this switch causes the generated code to internalize those annotations into the other generated classes.
-no-header
Suppress generation of a file header with timestamp.
-target (2.0|2.1)
Behave like XJC 2.0 or 2.1 and generate code that doesnt use any XJC 2.2 features.
-enableIntrospection
Enable correct generation of Boolean getters/setters to enable Bean Introspection apis.
-contentForWildcard
Generates content property for types with multiple xs:any derived elements.
-xmlschema
Treat input schemas as W3C XML Schema (default). If you do not specify this switch, your input schemas are treated as W3C XML Schema.
-verbose
Be extra verbose in compiler output.
-quiet
Suppress compiler output, such as progress information and warnings.
-help
Display a brief summary of the compiler switches.
-version
Display the compiler version information.
-fullversion
Display the compiler full version information.
-Xinject-code
Inject specified Java code fragments into the generated code.
-Xlocator
Enable source location support for generated code.
-Xsync-methods
Generate accessor methods with the synchronized keyword.
-mark-generated
Mark the generated code with the -@javax.annotation. Generated annotation.
-episode FILE
Generate the episode file for separate compilation.

JAXB Schema Generator Option

The JAXB Schema Generator, schemagen, creates a schema file for each namespace referenced in your Java classes. The schema generator can be started by using the appropriate schemagen shell script in the bin directory for your platform. The schema generator processes Java source files only. If your Java sources reference other classes, those sources must be accessible from your system CLASSPATH environment variable; otherwise errors will occur when the schema is generated. There is no way to control the name of the generated schema files.

You can display quick usage instructions by invoking the scripts without any options or by using the -help option. The syntax is as follows:

schemagen [-d path] 
    [java-source-files]

The -d path option specifies the location of the processor-generated and javac-generated class files.

About the Schema-to-Java Bindings

When you run the JAXB binding compiler against the po.xsd XML schema used in the basic examples (Unmarshal Read, Modify Marshal, Unmarshal Validate), the JAXB binding compiler generates a Java package named primer.po containing the classes, described in the following table.

Table:  Schema-Derived JAXB Classes in the Basic Examples

Class 描述
primer/po/Items.java Public interface that binds to the schema complexType named Items.
primer/po/ObjectFactory.java Public class extending com.sun.xml.bind.DefaultJAXBContextImpl; used to create instances of specified interfaces. For example, the ObjectFactory createComment() method instantiates a Comment object.
primer/po/PurchaseOrderType.java Public interface that binds to the schema complexType named PurchaseOrderType.
primer/po/USAddress.java Public interface that binds to the schema complexType named USAddress.

These classes and their specific bindings to the source XML schema for the basic examples are described in the following table.

Table: Schema-to-Java Bindings for the Basic Examples

XML Schema JAXB Binding
<xsd:schema xmlns:xsd=
 "http://www.w3.org/2001/XMLSchema">
 
<xsd:complexType 
  name="PurchaseOrderType">
  <xsd:sequence>
    <xsd:element 
      name="shipTo" 
      type="USAddress"/>
    <xsd:element 
      name="billTo" 
      type="USAddress"/>
    <xsd:element 
      ref="comment" 
      minOccurs="0"/>
    <xsd:element 
      name="items"
      type="Items"/>
  </xsd:sequence>
  <xsd:attribute 
    name="orderDate"
    type="xsd:date"/>
</xsd:complexType>
PurchaseOrderType.java
<xsd:complexType 
  name="USAddress">
  <xsd:sequence>
    <xsd:element 
      name="name" 
      type="xsd:string"/>
    <xsd:element 
      name="street" 
      type="xsd:string"/>
    <xsd:element 
      name="city" 
      type="xsd:string"/>
    <xsd:element 
      name="state" 
      type="xsd:string"/>
    <xsd:element 
      name="zip" 
      type="xsd:decimal"/>
  </xsd:sequence>
  <xsd:attribute 
    name="country" 
    type="xsd:NMTOKEN" 
    fixed="US"/>
</xsd:complexType>
USAddress.java
<xsd:complexType 
  name="Items">
  <xsd:sequence>
    <xsd:element 
      name="item" 
      minOccurs="1" 
      maxOccurs="unbounded">
Items.java
<xsd:complexType>
  <xsd:sequence>
    <xsd:element 
      name="productName" 
      type="xsd:string"/>
    <xsd:element 
      name="quantity">
      <xsd:simpleType>
        <xsd:restriction 
          base="xsd:positiveInteger">
          <xsd:maxExclusive 
            value="100"/>
        </xsd:restriction>
      </xsd:simpleType>
    </xsd:element>
    <xsd:element 
      name="USPrice" 
      type="xsd:decimal"/>
    <xsd:element 
      ref="comment" 
      minOccurs="0"/>
    <xsd:element 
      name="shipDate" 
      type="xsd:date" 
      minOccurs="0"/>
  </xsd:sequence>
  <xsd:attribute 
    name="partNum" 
    type="SKU" 
    use="required"/>
</xsd:complexType>
Items.ItemType
</xsd:element>
</xsd:sequence>
</xsd:complexType>
 
<!-- Stock Keeping Unit, a code for 
    identifying products -->
 
<xsd:simpleType 
  name="SKU">
  <xsd:restriction 
    base="xsd:string">
    <xsd:pattern 
      value="\d{3}-[A-Z]{2}"/>
  </xsd:restriction>
</xsd:simpleType>
 
</xsd:schema>
 

Schema-Derived JAXB Classes

The next sections briefly explain the functions of the following individual classes generated by the JAXB binding compiler for the examples:

Items Class

In Items.java:

ObjectFactory Class

In ObjectFactory.java:

As an example, in this case, for the Java interface primer.po.Items.ItemType, the ObjectFactory creates the method createItemsItemType().

PurchaseOrderType Class

In PurchaseOrderType.java:

USAddress Class

In USAddress.java:


Previous page: Customizing Generated Classes and Java Program Elements
Next page: Basic Examples